Installation:
Every StayFIT Bodyweight+ outdoor fitness system comes with a complete set of installation instructions and drawings. Following is an overview of the installation process.
The designated fitness area needs to have adequate space for the equipment, plus the recommended safe-use zone surrounding it. There should be a minimum of 36” around equipment (from outer edge of fitness system) more depending on the fitness activities, we recommend 6ft. in all directions.
StayFIT equipment is simple and easy to install – all the fitness activities are bolted on using pre-drilled holes after the vertical posts are secured. The vertical support posts are buried 30” deep using concrete (3-4 bags of 60” premix per hole) – they can also be installed on a concrete slab using a surface mount plate. Maintenance is minimal as there are no moving parts to wear out or break; however, general maintenance and bi-monthly safety checks for loose or worn components is recommended.
Maintenance:
StayFIT equipment is manufactured and designed for years of trouble-free use, but it is necessary to do a weekly safety inspection to ensure the equipment is safe to use. The inspection needs to include, but is not limited to, the following:
- Make sure all the vertical posts and equipment fastening bolts are tight and secure.
- Check for loose or damaged parts.
- Cushioning ground cover should be in good condition and the proper depth.
- Check for rocks, glass or anything that could be dangerous to the user in the area under and around the equipment.
StayFIT Bodyweight+ outdoor fitness equipment is built in the USA using the best materials available. StayFIT equipment is designed to last for years and years of demanding service. Pacific Outdoor Products has over 44 years of experience in manufacturing outdoor fitness equipment, playground equipment, and site furnishings.
If you have any questions on safety issues or requirements, call Pacific Outdoor Products at 425-432-6000.
